When did you last check your fire alarm? - 06/04/2018

A properly functioning smoke detector doubles your chance of surviving a fire by warning you early of a dangerous situation before it’s too late.

There are two kinds of smoke detectors:

• Battery-operated: These inexpensive units can easily be installed anywhere. They require frequent inspection to determine the condition of the battery.

• AC-powered: Installed by an electrician (or those with a good working knowledge of electricity), these units are much more dependable over the long haul due to their direct-wired power source. But they should have an independent battery backup so that they continue to operate during a blackout or an electrical fire that temporarily interrupts power.

 Some newer models have a hush-button feature that silences a nuisance false alarm and desensitizes the unit for a few minutes until the air clears, when it resets itself. Other high-end models have safety lights that come on when the alarm is activated.

All smoke detectors and alarms have a test button that, when pushed, causes the alarm to sound. Also, most detectors have either a blinking or a solid light that glows to let you know that the alarm is getting power.

Once a month, get up on a chair or use a broom handle for extra reach and push the test button. If you don’t hear anything, then your battery is dead. If after changing the battery, the smoke detector is still not working, immediately replace it with a new one.

While battery-operated units have a built-in device that chirps when batteries get low, signaling the need for replacement, common wisdom dictates not waiting until that point. Batteries should be replaced twice a year, once in the spring and once in the fall.

SO you have read this far so now go and check your detectors.